-40%
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2
Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2

Goulds Submersible Water Pump 1/3 HP 115V Continuous Duty 2" Outlet Cast Iron

$ 192.72

Availability: 100 in stock
  • Features: Submersible
  • Housing Material: Cast Iron
  • Condition: GOOD used Pump- pumps strong and whisper quiet
  • Rated Power: 1/3 hp
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Discharge Diameter: 2 in
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • MPN: WEO311L
  • Restocking Fee: No
  • Brand: Goulds

    Description

    Good Tested used Goulds WEO311L Submersible Pump- weighs over 65 lbs
    Cord has a split in the its sheathing near the pump and should be fixed or a new cord installed
    but it was tested completely submerged and plugged into a GFI circuit with no problems. see pics
    This is a powerful and heavy duty pump!
    Runs stong and quietly
    G((bottom shelf)
    1/3 HP - 115 Volts - Single Phase Submersible Effluent Pump
    APPLICATIONS
    Specifically designed for the following uses:
    Homes
    Farms
    Trailer Courts
    Motels
    Schools
    Hospitals
    Industry
    Effluent Systems
    FEATURES
    Impeller
    Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
    Casing
    Cast iron volute type for maximum efficiency. 2 NPT discharge.
    Mechanical Seal
    Silicon Carbide vs. Silicon Carbide sealing faces. Stainless steel metal parts, BUNA-N elastomers.
    Shaft
    Corrosion-resistant, stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation.
    Fasteners
    300 series stainless steel.
    Capable of running dry without damage to components.
    Designed for continuous operation when fully submerged.
    SPECIFICATIONS
    Pump:
    Solids handling capabilities: 3_4 maximum.
    Discharge size: 2 NPT.
    Capacities: up to 140 GPM.
    Total heads: up to 128 feet TDH.
    Temperature:104°F (40°C) continuous, 140°F (60°C) intermittent.
    Motors:
    Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer.
    Class B insulation on 1_3 - 1½ HP models.
    Class F insulation on 2 HP models.
    Single phase (60 Hz):
    Capacitor start motors for maximum starting torque.
    Built-in overload with automatic reset.
    SJTOW or STOW severe duty oil and water resistant power cords.
    1_3 - 1 HP models have NEMA three prong grounding plugs.
    1½ HP and larger units have bare lead cord ends.
    Designed for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged.
    Bearings: Upper and lower heavy duty ball bearing construction.
    Power Cable: Severe duty rated, oil and water resistant. Epoxy seal on motor end provides secondary moisture barrier in case of outer jacket damage and to prevent oil wicking. Standard cord is 20'. Optional lengths are available.
    O-ring: Assures positive sealing against contaminants and oil leakage.